Solo vendemos productos auténticos de proveedores a nivel mundial.
Localizador de tiendas
JJ Vent Solutions
JJ VENT HRV-100-WS | Ø100 mm Heat Recovery Ventilator — White
SKU: HRV-100-WS
€180,00
Todos los precios incluyen el IVA cuando corresponda.
Las transacciones intracomunitarias B2B elegibles con un número de IVA válido pueden estar sujetas a inversión del sujeto pasivo según las normas del IVA de la UE.
En stock
Entrega estimada entre el 08 Noviembre y el 10 Noviembre.
JJ VENT HRV-100-WS | Ø100 mm Heat Recovery Ventilator — White
€180,00
€180,00
Product Overview
The JJ VENT HRV-100-WS is a compact, wall-mounted, single-room heat recovery ventilator designed for continuous ventilation with reduced heat loss. Its reversible fan alternates between exhaust and supply operation in approximately 70-second cycles. During exhaust, outgoing room air warms the ceramic heat regenerator; during supply, incoming outdoor air is preheated as it passes through the regenerator.
This Ø100 mm, white model includes a dedicated two-speed wall switch for ON/OFF control and speed selection (I / II). It is intended for installation through an external wall using the supplied adjustable telescopic duct.
Key Features
- Single-room heat recovery ventilation with ceramic thermal regenerator
- Heat recovery efficiency up to 85% (manufacturer-stated)
- Two selectable fan speeds with supplied wall-mounted rocker switch
- Alternating approximately 70-second exhaust/supply operating cycle
- Airflow 20 / 24 m³/h; airflow in heat recovery mode 10 / 12 m³/h (speed I / II)
- Low electrical consumption: 1.5 / 2.0 W (speed I / II)
- Washable EU1 filters; IPX4 protection rating
- Telescopic wall duct adjustable from 300 to 555 mm
- White interior grille and exterior grille assembly
Technical Specifications
| Model | JJ VENT HRV-100-WS |
|---|---|
| Type | Single-room through-wall heat recovery ventilator |
| Nominal size | Ø100 mm |
| Finish | White |
| Control | Wall switch, OFF/ON, speeds I and II |
| Rated supply | 220–240 V AC, 50 Hz |
| Airflow — Speed I / II | 20 / 24 m³/h |
| Airflow in heat recovery mode — Speed I / II | 10 / 12 m³/h |
| Power consumption — Speed I / II | 1.5 / 2.0 W |
| Sound pressure at 3 m — Speed I / II | 27 / 32 dB(A) |
| Fan speed — I / II | 2050 / 2450 rpm |
| Heat recovery efficiency | Up to 85% (manufacturer specification) |
| Ingress protection | IPX4 |
| Filter classification | EU1 |
| Energy efficiency class | A (manufacturer-stated) |
| Operating temperature | −30 to +50 °C |
| Unit weight | 1.54 kg |
Dimensions
| A | 140 mm |
|---|---|
| B — Adjustable duct length | 300–555 mm |
| C | 81 mm |
| ØD | 106 mm |
| E | 153 mm |
| F | 148 mm |
Installation & Maintenance
Installation and electrical connections must be carried out by a qualified electrician. Install the telescopic duct with a 1–2° outward downward slope. Disconnect the supply before servicing. Clean the washable filters at least every three months and vacuum the ceramic heat regenerator at least once per year. Follow the supplied installation instructions and actual product terminal markings.
Specifications are based on supplier technical documentation and are subject to change. Verify requirements before installation. Product photography may show small original component markings.
Downloads
Autenticidad garantizada
- Seleccionar una opción actualiza la página completa.
- Se abre en una ventana nueva.