Nous ne vendons que des produits authentiques provenant de fournisseurs du monde entier.
Localisateur de magasin
JJ Vent Solutions
JJ VENT HRV-125-WS | Ø125 mm Heat Recovery Ventilator — White
SKU: HRV-125-WS
€203,95
Tous les prix incluent la TVA si applicable.
Les transactions B2B intracommunautaires éligibles avec un numéro de TVA valide peuvent être soumises au mécanisme d'autoliquidation en vertu des règles de TVA de l'UE.
En stock
Livraison estimée entre le 08 Novembre et le 10 Novembre.
JJ VENT HRV-125-WS | Ø125 mm Heat Recovery Ventilator — White
€203,95
€203,95
Product Overview
The JJ VENT HRV-125-WS is a white Ø125 mm single-room heat recovery ventilator for external-wall installation. A ceramic thermal regenerator alternately absorbs heat from outgoing room air and transfers it to incoming outdoor air; the included wall switch enables ON/OFF control and two fan speeds. Its performance figures are specific to the Ø125 mm version.
Key Features
- Ceramic thermal regenerator with up to 90% heat recovery efficiency
- Ø125 mm nominal through-wall installation, white finish
- Two selectable airflow rates: 20 / 30 m³/h (speed I / II)
- Recovery-mode airflow 10 / 15 m³/h (speed I / II)
- Low electrical consumption: 1.8 / 3.4 W (speed I / II)
- Included wall-mounted rocker switch for ON/OFF and speed I/II
- Automatic exhaust and supply phases, approximately 70 seconds each
- Telescopic duct 300–555 mm; IPX4 rating; washable EU1 filters
Technical Specifications
| Model | JJ VENT HRV-125-WS |
|---|---|
| Type | Single-room through-wall heat recovery ventilator |
| Nominal size | Ø125 mm |
| Finish | White |
| Control | Included two-speed wall switch (OFF/ON, I/II) |
| Supply voltage | 220–240 V AC, 50 Hz |
| Airflow — Speed I / II | 20 / 30 m³/h |
| Heat recovery mode airflow — Speed I / II | 10 / 15 m³/h |
| Power consumption — Speed I / II | 1.8 / 3.4 W |
| Sound pressure at 3 m — Speed I / II | 22 / 31 dB(A) |
| Fan rotation — Speed I / II | 1100 / 1700 rpm |
| Heat recovery efficiency | Up to 90% (manufacturer-stated) |
| Ingress protection | IPX4 |
| Filter classification | EU1 |
| Energy efficiency class | A (manufacturer-stated) |
| Ambient operating temperature | −30 to +50 °C |
| Unit weight | 1.90 kg |
Dimensions
| A | 165 mm |
|---|---|
| B — Adjustable duct length | 300–555 mm |
| C | 95 mm |
| ØD | 131 mm |
| E | 190 mm |
| F | 190 mm |
Construction & Installation
Kit comprises axial fan, ceramic heat regenerator, airflow straightener, two EU1 filters, adjustable telescopic duct, exterior grille and two-speed wall switch. Install through an exterior wall with approximately 1–2° outward downward duct slope. Electrical installation must be carried out by a qualified electrician, following the supplied documentation and the actual product terminal markings.
Downloads
- Technical Datasheet — HRV-125-WS (PDF)
- Installation & User Manual — English (PDF)
- Installation & User Manual — 15 Languages (PDF)
Specifications are based on supplier technical documentation and are subject to change; verify before installation. The product photographs illustrate the visually equivalent Ø150 mm model; Ø125 mm technical specifications and dimensions apply to this product. Product photos may include small original component markings.
Authenticité garantie
- Choisir une sélection entraîne un rafraîchissement complet de la page.
- Ouvre dans une nouvelle fenêtre.