JJ Vent Solutions

	__ __
Description	Description - __
Rating	Rating - __
Vendor	Vendor - __
Color	Color - __
	View full details

JJ VENT HRV-150-WS white heat recovery ventilator — complete wall-mounted unit and switch

JJ Vent Solutions

JJ VENT HRV-125-WS | Ø125 mm Heat Recovery Ventilator — White

(0)

€203,95

Product Overview

The JJ VENT HRV-125-WS is a white Ø125 mm single-room heat recovery ventilator for external-wall installation. A ceramic thermal regenerator alternately absorbs heat from outgoing room air and transfers it to incoming outdoor air; the included wall switch enables ON/OFF control and two fan speeds. Its performance figures are specific to the Ø125 mm version.

Key Features

Ceramic thermal regenerator with up to 90% heat recovery efficiency
Ø125 mm nominal through-wall installation, white finish
Two selectable airflow rates: 20 / 30 m³/h (speed I / II)
Recovery-mode airflow 10 / 15 m³/h (speed I / II)
Low electrical consumption: 1.8 / 3.4 W (speed I / II)
Included wall-mounted rocker switch for ON/OFF and speed I/II
Automatic exhaust and supply phases, approximately 70 seconds each
Telescopic duct 300–555 mm; IPX4 rating; washable EU1 filters

Technical Specifications

Model	JJ VENT HRV-125-WS
Type	Single-room through-wall heat recovery ventilator
Nominal size	Ø125 mm
Finish	White
Control	Included two-speed wall switch (OFF/ON, I/II)
Supply voltage	220–240 V AC, 50 Hz
Airflow — Speed I / II	20 / 30 m³/h
Heat recovery mode airflow — Speed I / II	10 / 15 m³/h
Power consumption — Speed I / II	1.8 / 3.4 W
Sound pressure at 3 m — Speed I / II	22 / 31 dB(A)
Fan rotation — Speed I / II	1100 / 1700 rpm
Heat recovery efficiency	Up to 90% (manufacturer-stated)
Ingress protection	IPX4
Filter classification	EU1
Energy efficiency class	A (manufacturer-stated)
Ambient operating temperature	−30 to +50 °C
Unit weight	1.90 kg

Dimensions

A	165 mm
B — Adjustable duct length	300–555 mm
C	95 mm
ØD	131 mm
E	190 mm
F	190 mm

Construction & Installation

Kit comprises axial fan, ceramic heat regenerator, airflow straightener, two EU1 filters, adjustable telescopic duct, exterior grille and two-speed wall switch. Install through an exterior wall with approximately 1–2° outward downward duct slope. Electrical installation must be carried out by a qualified electrician, following the supplied documentation and the actual product terminal markings.

Downloads

Specifications are based on supplier technical documentation and are subject to change; verify before installation. The product photographs illustrate the visually equivalent Ø150 mm model; Ø125 mm technical specifications and dimensions apply to this product. Product photos may include small original component markings.

In stock

Receives in 6 days.

JJ Vent Solutions

JJ VENT HRV-150-WS | Ø150 mm Heat Recovery Ventilator — White

(0)

€227,95

Product Overview

The JJ VENT HRV-150-WS is a white Ø150 mm through-wall heat recovery ventilator offering higher airflow for single-room ventilation. A reversible axial fan automatically alternates exhaust and supply phases, passing air through the ceramic heat regenerator; the supplied wall switch provides simple ON/OFF operation and two speed settings.

Key Features

Ceramic thermal regenerator with up to 90% heat recovery efficiency
Ø150 mm nominal through-wall installation, white finish
Two selectable airflow rates: 29 / 53 m³/h (speed I / II)
Recovery-mode airflow 15 / 27 m³/h (speed I / II)
Low electrical consumption: 1.8 / 3.7 W (speed I / II)
Included wall-mounted rocker switch for ON/OFF and speed I/II
Automatic exhaust and supply phases, approximately 70 seconds each
Telescopic duct 300–555 mm; IPX4 rating; washable EU1 filters

Technical Specifications

Model	JJ VENT HRV-150-WS
Type	Single-room through-wall heat recovery ventilator
Nominal size	Ø150 mm
Finish	White
Control	Included two-speed wall switch (OFF/ON, I/II)
Supply voltage	220–240 V AC, 50 Hz
Airflow — Speed I / II	29 / 53 m³/h
Heat recovery mode airflow — Speed I / II	15 / 27 m³/h
Power consumption — Speed I / II	1.8 / 3.7 W
Sound pressure at 3 m — Speed I / II	19 / 32 dB(A)
Fan rotation — Speed I / II	800 / 1450 rpm
Heat recovery efficiency	Up to 90% (manufacturer-stated)
Ingress protection	IPX4
Filter classification	EU1
Energy efficiency class	A (manufacturer-stated)
Ambient operating temperature	−30 to +50 °C
Unit weight	2.37 kg

Dimensions

A	190 mm
B — Adjustable duct length	300–555 mm
C	95 mm
ØD	156 mm
E	190 mm
F	190 mm

Construction & Installation

Downloads

Specifications are based on supplier technical documentation and are subject to change; verify before installation. Product photos may include small original component markings.

In stock

Receives in 6 days.

JJ VENT HRV-100-WSA anthracite heat recovery ventilator — complete wall-mounted unit and switch

JJ Vent Solutions

JJ VENT HRV-100-WSA | Ø100 mm Heat Recovery Ventilator — Anthracite

(0)

€179,95

Product Overview

The JJ VENT HRV-100-WSA provides wall-mounted single-room heat recovery ventilation in an anthracite finish, pairing the Ø100 mm through-wall ventilation kit with a matching two-speed wall switch. Its reversible fan alternates air extraction and intake through a ceramic regenerator to limit heat losses during ventilation.

Key Features

Ceramic thermal regenerator with up to 85% heat recovery efficiency
Ø100 mm nominal through-wall installation, anthracite finish
Two selectable airflow rates: 20 / 24 m³/h (speed I / II)
Recovery-mode airflow 10 / 12 m³/h (speed I / II)
Low electrical consumption: 1.5 / 2.0 W (speed I / II)
Included wall-mounted rocker switch for ON/OFF and speed I/II
Automatic exhaust and supply phases, approximately 70 seconds each
Telescopic duct 300–555 mm; IPX4 rating; washable EU1 filters

Technical Specifications

Model	JJ VENT HRV-100-WSA
Type	Single-room through-wall heat recovery ventilator
Nominal size	Ø100 mm
Finish	Anthracite
Control	Included two-speed wall switch (OFF/ON, I/II)
Supply voltage	220–240 V AC, 50 Hz
Airflow — Speed I / II	20 / 24 m³/h
Heat recovery mode airflow — Speed I / II	10 / 12 m³/h
Power consumption — Speed I / II	1.5 / 2.0 W
Sound pressure at 3 m — Speed I / II	27 / 32 dB(A)
Fan rotation — Speed I / II	2050 / 2450 rpm
Heat recovery efficiency	Up to 85% (manufacturer-stated)
Ingress protection	IPX4
Filter classification	EU1
Energy efficiency class	A (manufacturer-stated)
Ambient operating temperature	−30 to +50 °C
Unit weight	1.54 kg

Dimensions

A	140 mm
B — Adjustable duct length	300–555 mm
C	81 mm
ØD	106 mm
E	153 mm
F	148 mm

Construction & Installation

Downloads

Specifications are based on supplier technical documentation and are subject to change; verify before installation. Product photos may include small original component markings.

In stock

Receives in 6 days.

JJ VENT HRV-100-WS 100 mm white heat recovery ventilation unit with wall switch

JJ Vent Solutions

JJ VENT HRV-100-WS | Ø100 mm Heat Recovery Ventilator — White

(0)

€180,00

Product Overview

The JJ VENT HRV-100-WS is a compact, wall-mounted, single-room heat recovery ventilator designed for continuous ventilation with reduced heat loss. Its reversible fan alternates between exhaust and supply operation in approximately 70-second cycles. During exhaust, outgoing room air warms the ceramic heat regenerator; during supply, incoming outdoor air is preheated as it passes through the regenerator.

This Ø100 mm, white model includes a dedicated two-speed wall switch for ON/OFF control and speed selection (I / II). It is intended for installation through an external wall using the supplied adjustable telescopic duct.

Key Features

Single-room heat recovery ventilation with ceramic thermal regenerator
Heat recovery efficiency up to 85% (manufacturer-stated)
Two selectable fan speeds with supplied wall-mounted rocker switch
Alternating approximately 70-second exhaust/supply operating cycle
Airflow 20 / 24 m³/h; airflow in heat recovery mode 10 / 12 m³/h (speed I / II)
Low electrical consumption: 1.5 / 2.0 W (speed I / II)
Washable EU1 filters; IPX4 protection rating
Telescopic wall duct adjustable from 300 to 555 mm
White interior grille and exterior grille assembly

Technical Specifications

Model	JJ VENT HRV-100-WS
Type	Single-room through-wall heat recovery ventilator
Nominal size	Ø100 mm
Finish	White
Control	Wall switch, OFF/ON, speeds I and II
Rated supply	220–240 V AC, 50 Hz
Airflow — Speed I / II	20 / 24 m³/h
Airflow in heat recovery mode — Speed I / II	10 / 12 m³/h
Power consumption — Speed I / II	1.5 / 2.0 W
Sound pressure at 3 m — Speed I / II	27 / 32 dB(A)
Fan speed — I / II	2050 / 2450 rpm
Heat recovery efficiency	Up to 85% (manufacturer specification)
Ingress protection	IPX4
Filter classification	EU1
Energy efficiency class	A (manufacturer-stated)
Operating temperature	−30 to +50 °C
Unit weight	1.54 kg

Dimensions

A	140 mm
B — Adjustable duct length	300–555 mm
C	81 mm
ØD	106 mm
E	153 mm
F	148 mm

Installation & Maintenance

Installation and electrical connections must be carried out by a qualified electrician. Install the telescopic duct with a 1–2° outward downward slope. Disconnect the supply before servicing. Clean the washable filters at least every three months and vacuum the ceramic heat regenerator at least once per year. Follow the supplied installation instructions and actual product terminal markings.

Specifications are based on supplier technical documentation and are subject to change. Verify requirements before installation. Product photography may show small original component markings.

Downloads

In stock

Receives in 6 days.

Explore Related Collections